Advertisement
PROCEDURE FOR PREPARING YOUR ULTRASONIC CLEANER FOR
CLEANING
1. Plug the unit into a grounded outlet.
2. Fill the tank with water up to (or a little over) the fill mark on the inside of the
tank. Do not fill with water more than 1/2 inch from the top rim of the tank.
3. Turn On the Ultrasonic Cleaner Main On/Off Switch.
4. Select your cleaning temperature by turning the Temperature Dial to the
appropriate temperature. Please note that 90% of the time you will be
ultrasonic cleaning most objects between 70° Celsius and 80° Celsius.
5. Turn the Cleaning Time Set Knob to the Infinity Sign (Full On / ∞) at this
time.
6. Wait for the water to heat up to the temperature you set. This will show in
the LED Temperature Display.
7. When the LED Temperature Display shows the actual temperature you
set it at, add the ultrasonic cleaning solution (of your choice) to the water.
Please note that we do not sell an ultrasonic cleaning solution, but we have
always had very good results using Alconox® Products which can be found
many places on the web.
8. Turn on the Degassing Function for 5 minutes by pushing the Blue
Degassing Function Key (#4 above).
9. After you have degassed the solution for 5 minutes, then turn the degassing
function Off by pushing the Degassing Function Key. You are now ready to
ultrasonically clean your object(s).
- 6 -
Advertisement
