Wall Mounting - Huawei MateView GT User Manual

Wall Mounting

The SoundBar of the ZQE-CAA monitor cannot be used when the monitor is wall-
mounted.
An optional wall mount can be used with your device. Consult with your local dealer to
•
purchase the recommended wall mount bracket. Carefully attach the wall mount bracket at
the rear of the device. Install the wall mount bracket on a solid wall perpendicular to the
floor. If you are attaching the device to other building materials, please contact qualified
personnel to install the wall mount. Detailed instructions will be included with the wall
mount. Please use a wall mount bracket where the device is adequately secured to the wall
with enough space to allow connecting to external devices.
Prevent the holes on the device from being blocked by any objects and leave a space of
•
more than 10 cm around the device for heat dissipation.
Disconnect the power before moving or installing the device. Failing to do so may result in
•
electric shocks.
Remove the stand before installing the device on a wall mount by following the steps for
•
stand attachment in reverse.
If you install the device on a ceiling or slanted wall, it may fall and result in severe injury.
•
Use an authorized wall mount and contact your local dealer or qualified personnel.
Otherwise it is not covered by the warranty.
Do not over tighten the screws as this may cause damage to the device and void your
•
warranty.
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance
•
with the installation instructions.
Use screws and wall mounts that meet the following specifications. Any damages or injuries
•
resulting from misuse or using improper accessories are not covered by the warranty.
Model
Diameter (mm)
Length (mm)
Screw
When wall mount thickness is 2mm
Quantity
VESA screw hole specs (A x B) in millimeters
ZQE-CAA
M4
10
4
100 × 100
ZQE-CBA
M4
10
4
100 × 100
7