Table of Contents
Advertisement
6. When you get to the point where you want to stop dubbing, press the STOP button (and
then stop play on the other audio device if AUDIO 1).
• Audio dubbing stops and AUDIO DUB. disappears from the viewfinder.
• The camera returns to stop mode.
• You can also set zero set memory (p.82) at the place you want to stop audio dubbing, then every time
you return to that position, audio dubbing will cancel.
• If instead of pressing STOP you press PAUSE, the camera will return to the playback pause mode.
Notes:
• You cannot use the DV terminal while adding sound.
•
You might want to adjust the audio mix (p.96) when playing back a tape with added sound.
• There may be a loss of sound quality if you add sound to a tape recorded on a camera other than the
XL1S.
• After adding sound 3 or more times to the same place on a tape, there may be some loss in sound quality.
E
95
Advertisement
Table of Contents
