Download Print this page

Q-See QTN8044D Quick Start Manual page 2

Advertisement

When adjusting the zoom and focus, you should
be able to monitor the camera's view to ensure
that the image is properly in focus and includes
the entire area that you wish to monitor. This can
be done by connecting it to an NVR where you
can remotely monitor it using a phone or tablet.
Another method is to use the temporary power/
video cable (right). The white end is plugged into
the DC IN/CVBS port (d). A camera tester is
connected to the yellow and red ends to show the
camera's field of view.
SPECIFICATIONS
Camera Type
Dome
Camera Technology
IP
Image Sensor size
1/3"
Image Sensor Type
CMOS Aptina + Grain Media
Image Resolution
2688 x 1440, 2048 x 1536, 1920 x 1080, 1280 x 720,
640 x 480, 320 x 240
Megapixels (digital)
4
Effective Pixels
2688 x 1440
Lens Size
2.8 to 12mm
Angle of View
24 to 81°
IR Cut Filter
Yes
Night Vision
IR LEDS
30
Infrared Wavelength
850nM
Min Lux Illumination
0 Lux (LEDS on)
Night Vision Range
Up to 100 ft
Additional Image Features
Electronic Shutter
1/3s-1/100,000s
Gain Control
Auto/Manual
Wide Dynamic Range
Digital
Noise Reduction
3D DNR
SD CARD
The QTN8044D also has a slot for a Micro SD card (e)which allows the camera to
record still images when it is operating on its own network (ie; not directly connected to
the NVR with the Ethernet cable. Please see QT Series: Recording to an SD Card
d
c
at Q-See.com/Support for instructions.
RESET BUTTON
e
The Reset button (c) is also located inside the camera. This is only for use if the camera
becomes inoperable.
Audio
Audio
Audio Microphone
Audio Range
Connectivity
Connector Types
Other Connections
IP Protocol
Remote Monitoring
Use as Standalone
Compatible Mobile Devices
Compatible Systems
Power
Power Supply
Power Consumption
Physical
Weatherproof IP Rating
Body Construction
Weight
Dimensions (WxHxD)
Operating Temperature
External input
Audio input G711A compression
Depends on microphone used
RJ45 POE, Audio input, Audio output, RS485
2.1mm power, MicroSD (64GB), Alarm in, Alarm out,
ONVIF 2.3 Profile S
Yes
iPhone, iPad, Android
NVRs
12V 500mA or POE
<5.5W (LEDs ON)
IP66
Metal
35 oz
4.5 in x 6 in
-4° to 122°F, 10% to 90% Humidity

Advertisement

loading