Table of Contents
Advertisement
4. Align the small handle of the steam release valve with the small "closed" icon. This
will ensure the pressure cooker is airtight.
5. Plug the power cord into the pressure cooker and a socket, then switch the power
socket on. The display will flash and display a red horizontal line "---''. This indicates
the pressure cooker has entered standby.
6. Press the desired function button on the control panel. The light indicator of the
corresponding function will illuminate red. This display will show the default cooking
time. If you would like to change the function, press another function within 10
seconds.
7. Within 10 seconds of pressing the desired function, press the Texture button to set
the desired texture of food. This selection is more useful when cooking hardy
vegetables or meats.
There are three different textures (QUICK, STANDARD, LONGER). The default
texture is STANDARD and the light indicator on the texture adjustment settings
menu will reflect this. Press the Texture button until the light indicator illuminates
under the desired texture.
8. Press the Timer button to set the desired cooking time. The display will start flashing.
Use the timer adjustment buttons to adjust the hour setting. Press the Timer button
again then use the timer adjustment buttons to adjust the minute setting.
9. Press the Start/Cancel button to start. The red horizontal line "---" on the display will
stop flashing and the cooker will first enter a pressure building cycle that takes 10–15
minutes (depending on the amount of food in the pot) before cooking.
If you would like to stop the cooking function at any time, press the Start/Cancel
button. The cooker will stop cooking and return to standby.
Note:
The timer function is not available for the "Cake" and "Yogurt" modes.
10
Sealing
Advertisement
Table of Contents
