BenQ LS200 Series User Manual page 7

• Under no circumstances should you push the lens back manually as this may
damage the camera.
• All original accessories are designed only for use with this camera model you
purchased. Do not use these accessories with other camera models or cameras of
other brands to avoid unpredictable danger or damage.
• Before initial use of a memory card, always use the camera to format the card first.
• Remember to slide the write-protect tab (if available) to the unlock position.
Otherwise, all data (if any) on the memory card is protected and the card cannot
be edited or formatted.
Operating environment
• Do not use or store your camera in the environments listed below:
• Direct sunlight
• Dusty places
• Next to an air conditioner, electric heater or other heat sources
• In a closed car that is in direct sunlight
• Unstable locations
• Do not use your camera outdoors when it is raining or snowing.
• Do not use your camera in or near water.
• The camera operating temperature is between 0 and 40 degrees Celsius. It is
normal for the operating time to be shortened when the temperature is low.
• The capacity of your camera batteries will reduce each time it is charged/emptied.
• Storage at too high or low temperatures will also result in a gradual capacity loss.
As a result, the operating time of your camera may be considerably reduced.
• It is normal for the camera to become warm during operation, because the camera
casing might conduct heat.