Install Griddle - Maytag MGS8800FZ Installation Instructions Manual

For Model KSGG700E:
A
B
A. Small (Auxiliary) C. Medium
(Semi Rapid)
B. X-Large (Stack)
For Model KSGB900E:
A
B
A. Small (Auxiliary) C. Oval (OV)
B. X-Large (Stack)
NOTE: Each round burner base is marked with one of the
following: AUX, SR, UR, ST.
5. Align the gas tube opening in the burner base with the
orifice holder on the cooktop and the igniter electrode
with the notch in the burner base.
A. Burner cap
B. Gas tube opening
C. Burner base
6. Place the burner caps on the appropriate burner bases.
IMPORTANT: The bottom of the small and medium caps are
different. Do not put the wrong size burner cap on the burner
base. Each round burner cap is marked with an AUX, SR,
UR, or ST to match with a letter on the burner base.
SR
AUX
Small cap Medium cap
(Auxiliary) (Semi Rapid)
12
D
C
E
D. Medium (Semi Rapid)
E. Large (Ultra Rapid)
D
C
E
D. Medium (Semi Rapid)
E. Large (Ultra Rapid)
A
B
C
D
E
D. Orifice holder
E. Igniter electrode
ST
UR
Large cap
X-Large cap
(Ultra Rapid)
(Stack)
Burner caps should be level when properly positioned. If
burner caps are not properly positioned, surface burners
willnot light. The burner cap should not rock or wobble when
properly aligned.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
7. Plug into a grounded 3 prong outlet.

Install Griddle

Applicable to KSGB900E only.
1. Place the "FRONT" end of the griddle down, facing the oven
door. Verify that the feet are placed onto the grate.
NOTE: The image shown is generic, actual product may look
different.
A. Front
B. Feet
2. Clean the griddle before using. Refer to the Use and Care
Guide for cleaning instructions. The griddle can be placed
over the left, right, or center burner.
A
A. Incorrect
B
B. Correct
A
B