Table of Contents
Advertisement
Video image looks unnatural
Colors are unnatural
Check
Is the color space of the input signal
correctly set?
Is the image correctly adjusted?
Is the AV device or PC properly
connected?
* The video image may appear slightly reddish immediately after starting up. This is not a malfunction.
Video image is fuzzy
Check
Is the focus correctly adjusted?
Is the unit placed too near or too far away
from the screen?
Projected image is dark
Check
Is the laser light source near exhaustion? Check the laser light source time in the "Information" menu.
Is the aperture closed?
Is the value of the "LD Current" setting
small?
Striped patterns appear on the screen
Check
Does the fabric of the screen have a
regular pattern?
Video images are missing
Check
Has screen mask been configured?
The color may turn out unnatural when the input signal is
different from that in the projector setting.
Set the "Color Space" for "Input Signal" correctly.
Adjust "Color" and "Tint" accordingly.
Connect the AV device or PC properly.
Adjust the focus.
Set the unit at a correct distance from the screen.
If 20,000 hours have elapsed, the brightness will be half the
brightness at shipment.
Increase the value of the "Aperture" setting.
Increase the value of the "LD Current" setting.
Interference fringes may sometimes occur between the
fabric pattern and the pixels. Please consult the authorized
dealer.
Set "Mask" to "Off".
Action
Action
Action
Action
Action
Refer to
P. 34
P. 33
P. 23
Refer to
P. 35
P. 60
Refer to
P. 45
P. 29
P. 29
Refer to
—
Refer to
P. 41
53
Advertisement
Table of Contents
