ecolight UC1034-BR2-12LF0-E Instruction Manual page 3

Led linking under cabinet bar
Table of Contents

Advertisement

Available languages

Available languages

5
When finished linking the additional fixtures, insert the power cord to the lead fixture
and then into the wall outlet. Each fixture can be independently operated. Turn fixture
on by the ON/OFF switch on the end of the fixture. Use the slide dimmer on the face of
the fixture to control the brightness.
Troubleshooting Guide
Minor problems often can be fixed without the help of an electrician. Before doing any work
on the fixture, shut off power supply at the circuit breaker panel to avoid electrical shock.
r P
l b o
m e
Fixture doesn't light.
Fuse blows or circuit breaker
trips when light is turned on.
Care and Maintenance
IMPORTANT: This light fixture uses light emitting diodes (LEDs) to provide
light. LEDs do not have a filament to burn out like a traditional light bulb.
LEDs gradually emit less light over their lifetime, but will typically last 36,000
hours in a residential environment.
Periodically clean the fixture and diffuser using a mild, non-abrasive cleaner
and soft cloth. When cleaning the fixture, make sure the power is turned off.
Do not spray cleaner directly onto any part of the fixture or LEDs.
Replacement Parts List
Keep this guide handy for
ordering replacement parts.
Need Help?
In the event you are missing a part or have questions regarding installation
please visit our website at
call the Customer Care Center 1-800-291-8838,
8:30 a.m.-5 p.m., CST, Monday-Friday.
The manufacturer warrants this lighting fixture to be free from defects in materials and
workmanship for a period of (6) years from the date of original purchase by the
consumer. The fixture is not warrantied for use in a commercial or retail application.
The warranty is limited to use in a residential environment. We will repair or replace (at
our option) the unit in the original color and style if available, or in a similar color and
style if the original item has been discontinued, without charge. Defective units must be
properly packed and returned to the manufacturer with a letter of explanation and your
original purchase receipt showing date of purchase. Call 1-800-291-8838 to obtain a
return authorization number and an address where to ship your defective product.
Note: C.O.D. shipments will NOT be accepted. The liability of the manufacturer is in any
case limited to replacement of the defective light fixture product. The manufacturer will
not be liable for any other loss, damage, labor costs or injury which is caused by the
product. This limitation upon the liability of the manufacturer includes any loss,
damage, labor costs or injury which is (I) to person or property or otherwise; (II)
incidental or consequential in nature; (III) based upon theories of warranty, contract,
negligence, strict liability, tort, or otherwise; or (IV) directly, or indirectly related to the
sale, use, or repair of the product. This warranty gives you specific rights, and you may
also have other rights which vary from state to state.
Ecolight™ 5260 Capitol Drive, Wheeling, IL 60090
C
u a
e s
Power is off.
Bad connection.
Bad switch.
Discontinue use.
www.goodearthlighting.com/support
Ecolight™ Warranty
6 YEAR LIMITED WARRANTY
Hardware Kit
ZH-UC1034F00-BR2
- 3 -
o S
t u l
n o i
Check if power supply is on.
Check cords and/or wiring.
Test or replace switch.
Call customer service.
or
Printed in China

Advertisement

Table of Contents
loading

This manual is also suitable for:

Uc1034-br2-18lf0-eUc1034-br2-24lf0-e

Table of Contents