Using The Hm-184Ul - Icom IC-M85UL Instruction Manual

10
SPECIFICATIONS AND OPTIONS

■ Using the HM-184UL

Alligator type clip
[PTT]
Microphone
Speaker
Turn OFF the transceiver before
attaching or detaching the microphone
NOTE:
• NEVER immerse the connector in water. If the connector
becomes wet, BE SURE to dry it before attaching to the
transceiver.
• The microphone element is located at the top left of the
speaker microphone, as shown in the illustration above.
To maximize the readability of your transmitted audio,
hold the microphone approximately 5 to 10 cm (2 to 4
inches) from your mouth, and then speak at your normal
voice level.
25
To attach:
Attach the connector of the speaker microphone to
the multi connector on the transceiver and tighten the
screw.
Turn OFF
CAUTION: Firmly attach to
the multi connector, but do not
overtighten. A loose connection
will allow water intrusion into
the connector. Over-tightening
the connection can damage the
transceiver.
Screw
Coin