Related Manuals for Davies Pump Ultravort Series
Summary of Contents for Davies Pump Ultravort Series
- Page 1 Davies Ultravort Series Year Warranty Installation/Owner’s Manual DAVIES UV SERIES | argondistributors.co.nz...
-
Page 2: Delivery And Storage
DAVIES UV SERIES Dear Client Congratulations on your purchase of a quality pump from the Davies range of pumping products. Like all Davies products, quality and reliability are first and foremost, carefully chosen from manufactures worldwide to carry this proven brand name and deliver years of service. -
Page 3: Electrical Installation
Pump Installation Ensure mains power is disconnected at supply before doing any installation or maintenance. All installations must comply with any applicable local or national codes. Not suitable for pumping liquids that are hazardous, flammable, explosive or over 40 degrees. The UV series pumps are designed to pump dirty water with suspended solids not larger than maximum free passage size of the pump –... -
Page 4: Maintenance
DAVIES UV SERIES Before connecting the pump to the mains power supply, check the Voltage, Amps and frequency corresponds with the motor nameplate rating. Single phase pumps under 10Amps can be connected directly to an electrical outlet, all other models must be connected to a switch or suitable control box such as Simplex. -
Page 5: System Troubleshooting
System Troubleshooting This is intended as a guide only. For further maintenance of the pump, please contact your supplier. Cause Check Action 1. Power supply fault. 1. Check voltage at supply. 2. Lead or float damaged. 2. Replace damaged parts. 3. - Page 6 DAVIES UV SERIES Warranty Policy for Davies Pumps Your Davies Pump, when used for its designed purpose should give you years of trouble free service. Please take the time to read and understand the operator’s manual for this pump before installing and running your pump.
- Page 7 Pump Service Records ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ Declaration of Conformity For the safety evaluation of the compliance with this Directive 2014/35/EU the following standards were applied: IEC 60335-2-41:2002/A2:2009 & IEC60335-1:2010 EN 60335-2-41:2003/A2:2010 & EN 60335-1:2012 The above product is in conformity with the Low Voltage Directive 2014/35/EU in order to comply with the requirement in the EUROPEAN COUNCIL DIRECTIVE 2014/35/EU relating to electrical equipment designed for use within certain voltage limits and the Amendment Directive of 2014/35/EU.
- Page 8 Proven solutions through experience argondistributors.co.nz DAVIES UV SERIES | argondistributors.co.nz...