Table of Contents
Advertisement
■ Selecting the Test Pattern
Cut out a test pattern from paper.
Memo
• The language setting can be specified in the
settings screen (see "Language" on page 23).
a
Select "Pattern" in the home screen.
b
Touch the "Test" key in the pattern category
selection screen.
c
Select a pattern in the pattern selection screen.
• We recommend using pattern "T-02" when cutting
paper and pattern "T-03" when cutting fabric.
d
Touch the "Set" key.
e
Check the pattern arrangement, and then touch
the "OK" key.
• For details on changing the pattern arrangement,
see "Pattern Layout Screen" on page 35.
• Press
to cancel the pattern selection, and
then select the pattern again.
20
■ Loading the Mat
a
Attach the material that will be cut to the mat.
• For details on attaching material to the mat, see
"Mat and Cutting Blade Combinations" on
page 12.
b
While holding the mat level and lightly
inserting it into the feed slot, press
operation panel.
Lightly insert the mat so that it aligns with the guides
on the left and right sides of the feed slot and is tucked
under the feed rollers.
b
a
a Guides
b Feed rollers
The mat is fed in to complete the preparations for
cutting.
in the
b
a
Advertisement
Table of Contents
