Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG HG90FXA
Summary of Contents for AEG HG90FXA
- Page 1 EN User manual HG60FXA HG75FXA HG90FXA...
-
Page 3: General Notice
GENERAL NOTICE We invite you to read this instruction booklet carefully, before installing and using the equipment. It is very important that you keep this booklet together with the equipment for any future consultation. If this equipment should be sold or transferred to another person, make sure that the new user receives the booklet, so that they can learn how to operate the appliance and read the corresponding notice. -
Page 4: Instructions For The User
INSTRUCTIONS FOR THE USER It is necessary that all the operations regarding the installation, adjustment and adaptation to the type of gas available are carried out by authorised personnel, in conformity with the regulations in force. The specific instructions are described in the booklet section intended for the installer. - Page 5 INSTRUCTIONS FOR THE USER 1 Burner 3 Injector 2 Flame safeguard sensor 4 Ignition spark plug If you have a problem with the cooktop, check the table below. You may be able to solve the problem and this will save you from paying for a service call.
-
Page 6: Instructions For The Installer
INSTRUCTIONS FOR THE USER CLEANING Wash with warm soapy water and rinse with clean water. Where the stainless steel has become extremely dirty Before any operation, disconnect the appliance from with signs of surface discolouration (due to periods of the electrical supply. neglect or misuse) use a stainless steel cleaner Don’t use a steam cleaner for the cleaning the hob. -
Page 7: Installation Room
A duplicate rating label is included with these HG75FXA instructions. Ensure this is attached to a readily HG90FXA accessible surface, so that the cooktop can be easily identified in the case of a service call. Rangehoods and exhaust fans* shall be installed INSTALLATION ROOM in accordance with the manufacturer’s relevant... - Page 8 INSTRUCTIONS FOR THE INSTALLER to make an adjustment to obtain the correct outlet sealing washersupplied. pressure setting. The ½” parallel thread connects to the manifold, and An arrow on the base of the regulator indicates the sealing washer is placed between the manifold the direction of gas flow when the inlet and outlet end and the flat face on the elbow.
-
Page 9: Testing Appliance Operation
INSTRUCTIONS FOR THE INSTALLER Once these checks have been completed, if the After changing the injectors, it is necessary to regulator still fails to perform in a satisfactory eliminate residual natural gas in the system. manner it should be replaced. To do this you have to turn to the maximum position then press the knob of each burner and Electrical connection... - Page 10 MAXIMUM INNER AND OUTER RING MAXIMUM MINIMUM INNER RING CLOSED OUTER RING MAXIMUM INNER RING MINIMUM CLOSED OUTER RING MAXIMUM INNER RING MINIMUM OUTER RING Note that the dotted line section shown above is the transition between the operating zones. It is recommended not to leave the knob in this position.
- Page 11 For the external ring For the internal ring...
- Page 12 Gas Connection Electrical Supply Cord MODEL: HG75FXA Depth of cooktop casing from benchtop surface : 60 mm Gas Connection Electrical Supply Cord MODEL: HG90FXA Depth of cooktop casing from benchtop surface : 60 mm Universal LPG 2 Semi-rapid burner 6.3 MJ/h 5.6 MJ/h...
- Page 13 (due to periods of neglect or misuse) use a stainless steel cleaner DO NOT use abrasive scourers or steel wool. When removing these stains be sure to follow the polish of brushing lines. MODEL HG60FXA MODEL HG75FXA MODEL HG90FXA...
-
Page 14: Technical Characteristic Tables
Natural 1.00 75 / 130 (x2) inner / 1 turn 18.0 outer Universal LPG 2.75 DOUBLE (WOK) CROWN Natural 1.00 Adjust. 10.3 WIRING DIAGRAM MODEL: HG60FXA MODEL: HG75FXA / HG90FXA TRIPOLAR IGNITION TRIPOLAR IGNITION TERMINAL GENERATOR TERMINAL GENERATOR MICRO-UNIT MICRO-UNIT... - Page 15 INSTRUCTIONS FOR USING THE MINI TRIVET The mini-trivet included with this cooktop is to be used for cooking vessels of diameter 120mm or smaller Correct fitment Examples of positioning of mini-trivet MODEL: HG60FXA MODEL: HG75FXA MODEL: HG90FXA...
- Page 16 HG90FXA Please note the step of the trivet fingers on the wok burner main trivet. (applicable for models HG75FXA and HG90FXA) To avoid spillages lift and move cooking receptacles to and from this burner rather than sliding across the trivets...
- Page 17 (viii) failure to comply with any additional instructions supplied with the Appliance; (e) AEG is the brand controlled by Electrolux Home Products Pty Ltd of 163 O’Riordan Street, Mascot NSW 2020, ABN 51 004 762 341 in (b) the Appliance is modified without authority from Electrolux in respect of Appliances purchased in Australia and Electrolux (NZ) writing;...
- Page 20 COD. 208685-00 - 09.09.2015...