Frigidaire PLGF659EC Use And Care Manual page 5

Frigidaire plgf659ec: user guide
Hide thumbs Also See for PLGF659EC:
Table of Contents


• Placement of oven/warmer drawer (if equipped)
racks. Always place oven racks in desired location while
oven/warmer drawer (if equipped) is cool. If rack must
be moved while oven is hot use extreme caution. Use
potholders and grasp the rack with both hands to
reposition. Do not let potholders contact the hot heating
elements in the oven/warmer drawer (if equipped).
Remove all utensils from the rack before moving.
• Do not use a broiler pan without its insert. Broiler pan
and its insert allow dripping fat to drain and be kept away
from the high heat of the broiler.
• Do not cover broiler insert with aluminum foil.
Exposed fat and grease could ignite.
• Do not touch a hot light bulb with a damp cloth.
Doing so could cause the bulb to break. Disconnect the
appliance or turn off the power to the appliance before
removing and replacing light bulb.
• Clean the range regularly to keep all parts free of
grease that could catch fire. Exhaust fan ventilation
hoods and grease filters should be kept clean. Do not
allow grease to accumulate on hood or filter. Greasy
deposits in the fan could catch fire. When you are
flaming food under the hood, turn the fan on. Refer to the
hood manufacturer's instructions for cleaning.
Grounding Instructions
For personal safety, the cooktop must be properly grounded. For
maximum safety, the power cord must be plugged into an electrical
outlet that is correctly polarized and properly grounded.
DO NOT Operate the cooktop using a 2-prong adapter or an extension
cord. If a 2-prong wall receptacle is the only available outlet, it is the
personal responsibility of the consumer to have it replaced with a properly
grounded 3-prong wall receptacle installed by a qualified electrician.
See the INSTALLATION INSTRUCTIONS packaged with this range
for complete installation and grounding instructions.
This appliance is equipped with a 3-prong grounding
plug for your protection against shock hazard and should be plugged
directly into a properly grounded receptacle. DO NOT cut or remove
the grounding prong from this plug.
Personal injury or death from electrical shock may
occur if the range is not installed by a qualified installer or electrician.
Conversion to Liquefied Petroleum Gas (or L. P. Gas)
This natural gas range is designed to allow for conversion to
Liquefied Petroleum (L. P.) Gas.
Only a qualified service agent should perform the L. P. conversion.
Call an authorized servicer if you wish to have them perform the
conversion. An L. P. Conversion Kit is provided with this range
and is located on the main back of the range. The kit contains
Important Safety Instructions
• In the self-Cleaning cycle only clean the parts listed in this
Use and Care Guide. Before self cleaning the oven, remove all
utensils or foods from the oven.
• Do not use oven cleaners—No commercial oven
cleaner or oven liner protective coating of any kind should
be used in or around any part of the oven.
• Do not clean door gasket—The door gasket is essential
for a good seal. Care should be taken not to rub, damage
or move the gasket.
• Remove oven racks. Oven racks color will change if left
in the oven during a self-cleaning cycle.
The health of some birds is extremely
sensitive to the fumes given off during the self-cleaning
cycle of the range. Move the birds to another well
ventilated room.
Important Safety Notice
The California Safe Drinking Water and Toxic Enforcement
Act requires the Governor of California to publish a list of
substances known to the state to cause cancer, birth
defects or other reproductive harm, and requires
businesses to warn customers of potential exposure to such
type wall
DO NOT use an adapter plug, an extension cord, or
remove grounding prong from electrical power cord.
Failure to follow this warning can cause serious
injury, fire or death.
installation instructions which must be read before and followed
carefully when installing the kit.
To avoid serious injury, any additions, changes
or conversions required in order for this appliance to
satisfactorily meet the application needs must be made by a
qualified service agent.
Do not, under any
cut, remove, or
bypass the
grounding prong.
Power supply cord with
3-prong grounding plug
Avoid fire hazard or electrical shock.

Hide quick links:


Table of Contents

Table of Contents