Photos
Refer to this chapter for details on shooting photos – taking
photos and playing them back, capturing photos from video
and printing photos.
Basic Recording
Taking Photos
1 Set the camera mode dial to
.
2 Turn on the camcorder.
By default, photos are
recorded in the built-in memory. You
can set the memory card as the
recording media for photos (
PHOTO
3 Press
Once the focus is automatically
adjusted,
or more AF frames will appear.
PHOTO
4 Press
The ACCESS indicator will flash as the photo is being recorded.
IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder's operating mode.
90
Photos
halfway.
will turn green and one
fully.
(
or
42).
34)