Canon VIXIA HF20 Instruction Manual page 156

Mem. Card Number of scenes already at maximum
- The memory card already contains the maximum number of scenes (3,999 scenes); no fur-
ther scenes can be copied onto the memory card. Delete some scenes (
space.
Mem. Card Unable to recognize the data
- The memory card contains scenes recorded in a different television system (PAL or SECAM).
Memory card cover is open
- After inserting a memory card, close the memory card slot cover (
Memory card is full
- The memory card is full. Delete some recordings (
the memory card.
Memory card is write-protected
- The LOCK switch on an SD or SDHC memory card is set to prevent accidental erasure. Change
the position of the LOCK switch (
Need to recover files from the memory card. Change the position of the LOCK switch on the
memory card.
- This message will appear the next time you turn on the camcorder if power supply was acci-
dentally interrupted while the camcorder was writing on the memory card and later the posi-
tion of the card's LOCK switch was changed to prevent erasure. Change the position of the
LOCK switch (
No memory card
- There is no memory card in the camcorder.
No photos
- There are no photos to play back.
No scenes
- There are no scenes in the memory selected.
- After selecting [Scene Search]
no scenes were recorded using the face detection function.
Not available in Dual Shot
- You pressed a button that cannot be used in
or to set the camcorder to flexible recording mode.
Number of scenes already at maximum
- The maximum number of scenes (3,999 scenes) has been reached. Delete some scenes
( 58) to free some space.
- The playlist can contain a maximum of 999 scenes.
Operation canceled
- The operation was canceled following user intervention.
156
Additional Information
164).
164).
[Scenes with Faces]: No scenes contain people's faces or
42).
58, 94) to free some space or replace
mode. Set the camera mode dial to
58) to free some