Canon VIXIA HF20 Instruction Manual page 143

System Setup 2
Menu item
[Wireless Remote
Control]
[Notification Sounds] [
[Power Saving Mode] [
[Quick Start]
1
[Control for HDMI]
/
[Initialize ]
[Initialize ]
[Photo Numbering]
[Firmware]
1
Option not available when the camcorder is connected to an HDTV using an HDMI
cable.
2
Option available only from the original movies index screen.
[Wireless Remote Control]:
wireless controller.
[Notification Sounds]:
ing on the camcorder, the self-timer countdown, etc.
[Power Saving Mode]:
powered by a battery pack, it will automatically shut off if left without any
operation for 5 minutes.
• Approximately 30 seconds before the camcorder shuts off, [Auto power
off] will appear.
• In standby mode, the camcorder will shut off after the time selected for
the [Quick Start] setting.
[Quick Start]:
Select whether to activate the Quick Start function when
you close the LCD panel in a recording mode (
time after which the camcorder will end the standby mode and shut off
automatically.
Setting options
[ On], [ Off
High Volume],
[ Low Volume], [
On], [ Off]
[ Off], [ 10 min],
[ 20 min], [
[ On], [ Off]
[Built-in Mem.],
[Mem. Card]
[Quick Initialization],
[Complete Initialization]
[ Reset], [ Continuous]
–
Allows the camcorder to be operated with the
A beep will accompany some operations like turn-
In order to save power when the camcorder is
]
Off]
30 min]
–
48) and the length of
Additional Information
–
–
–
– – –
–
2
43
–
– – –
143