LG URNU96GB8Z2 Owner's Manual page 8

Operating Instructions
Name and function of wired remote controller(Accessory)
1
2
3
4
5
6
7
PQWRCDF0 (Heat pump)
PQWRHDF0 (Cooling only)
Operation Mode
Cooling Mode
Auto Mode or Auto Changeover
Dehumidification mode
Fan Mode
• Cooling Model( ), Heat Pump Model(
8 Fresh Air Intake Unit
8
9
10
11
12
13
14
15
16
Heating Mode
)
1. Plasma button (optional)
Used to start or stop the plasma-purification
function.
2. Jet cool button
Speed cooling operates super high fan speed.
3. Operation mode selection button
Used to select the operation mode.
4. Function setting button
Used to set or clear auto clean or smart clean.
5. LCD luminosity button (optional)
Used to adjust LCD luminosity
6. Smart clean button (optional)
Used to start or stop smart clean.
7. Clear all button
Used to clear all timer.
8. Room temperature setting button
Used to select the setting outlet temperature
9. ON/OFF button
Used to turn off/on the unit.
10. Indoor fan speed selection button
Fan speed in all step is same
11. Auto swing button
Used to stop or start louver movement and set the
desired up/down airflow direction.
12. Horizontal airflow direction control button
(optional)
Used to set the desired horizontal airflow direction.
13. Timer and time setting button
Used to set the time of starting or stopping and
sleeping operation.
14. Room temperature checking button
• Used to check the room temperature.
• Displays only the room temperature of the remote
controller perception.
There is no control of room temperature.
15. ˚C/˚F switch button
Used to switch temperature reading from Celsius to
Fahrenheit.
16. Reset button
Used to reset the remote controller.