Table of Contents
Advertisement
a. Push the increment button to select Manual reset [r.01] or Automatic reset [r.02].
b. Push the select button to step to the Timer delay type setting.
4. Timer delay type.
a. Push the increment button to select Timer delay type [d.01-d04].
b. Push and hold the select button to step to the Time setting.
c. Push the select button to step to the Password setting.
5. Time setting.
a. Push the increment button to select the Delay time.
b. Push and hold the select button to step to the Timer delay type setting.
c. Push the select button to step to the next segment.
6. Password setting is shown.
a. Push and hold the select button to step to Password entry.
b. Push the select button to step to the Store mode.
7. Password entry.
a. Push the increment button to increment the flashing segment.
b. Push the select button to step to the next segment.
c. Push and hold the select button to verify the password.
8. Store mode.
a. Push and hold the select button to store the settings.
b. Push the select button to return to Custom entry.
9. Fail safe mode waiting for power.
a. Power cycle the safety relay.
10. The safety relay is in operation mode with a custom configuration.
8.12
Operation mode with preset
3b
1.
Preset entry. This entry is shown to indicate the current preset mode. During countdown,
the remaining time is displayed.
a. Push the select button to step to the timer setting.
2. Timer setting.
a. Push the select button to step to the Log entry.
3. Log entry.
a. Push and hold the select button to enter the logged error codes.
2TLC010073M0201 Rev.G
P.0X
1
1a
t.XX
2
2a
3
3a
0.XX
LoG
4b
4a
4
27
Advertisement
Table of Contents
