[P.0X]
P.01
P.02
P.03
P.04
P.05
P.06
P.07
8.9
Configuration in preset mode
3b
1.
Preset mode.
a. Push the Increment button to select type of preset configuration or to select custom
mode [CUS].
b. Push the Select button to step to the Timer setting.
2. Timer setting.
a. Push the Increment button to step between the available time settings.
b. Push the Select button to confirm the setting and step to store mode [Sto].
3. Store mode.
a. Push and hold the Select button to store the configuration.
b. Push the Select button to return to Preset mode.
4. Failsafe mode waiting for power cycling.
a. Power cycle (power off and on) the safety relay.
5. The safety relay is in operation mode with a preset configuration.
2TLC010073M0201 Rev.G
Configuration Signal type
Equivalent
contacts
Antivalent
contacts
Pressure
sensitive
device
Two-hand
device
1
1a
P.01
1b
2
2a
t. 0
2b
Sto
3
3a
- - -
4
4a
5
Reset
2 x NO, 24 VDC
Manual reset
or signal from
Automatic
T1/T2
reset
NO + NC, 24
Manual reset
VDC or signal
Automatic
from T1/T2
reset
Square wave
Manual reset
from T1/T2
Automatic
reset
Timer delay
Time
Off-delay
0.0 s, 0.5 s, 1.0
s, 1.5 s, 2.0 s,
3.0 s, 5.0 s,
10.0 s, 15.0 s,
30.0 s
25