Advertisement
Operating Instructions
TO TURN UNIT OFF:
Note: If the unit is turned off in heat mode (if applicable) or fan only mode, it will return to the same setting when it is
turned on again. When the unit is turned off in cool or energy saver mode, it will run in energy saver mode when it is turned
on again, but the setting of temperature and fan speed will remain. When unit is shut off in the Heat Mode, the fan will
continue to run for a few seconds to dissipate residual heat within the unit.
Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with.
● The "Cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly. This
prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue to run
during this time. The control will maintain the set temperature within 2 degrees Fahrenheit, between 60F and
90F degrees (in cool mode), 55F and 80F degrees (in heat mode).
● There is a 2-Second delay for the compressor shutting down when selecting FAN ONLY/HEAT. This is to cover the possibility of having to
roll through to select another mode.
● After a power outage, the unit will memorize the last setting and return the unit to the same setting once power is restored.
(4-WAY)
(continued)
DO THIS:
PRESS
ON/OFF BUTTON
ADDITIONAL THINGS YOU SHOULD KNOW
4-Way Air Directional Louvers
The 4-Way air directional louvers allow you to direct the air
flow Up or Down and Left or Right throughout the room as
needed. To adjust the air directional louvers side-to-side, use
the center handle as you move it side-to-side.
Operating Instructions
YOU WILL SEE:
9
Advertisement
