Visit the Frigidaire Web Site at: http://www.frigidaire.com Range Welcome... 2 ES330 Control, Self-Cleaning Oven with Sealed Gas Burners Important Safety Instructions ...3-5 Features at a Glance ... 6 Before Setting Oven Controls ... 7 Setting Surface Controls ... 8 Oven Control Functions ... 9 Setting Oven Controls ...
Ask your dealer to recommend a qualified technician and an authorized repair service. Know how to disconnect the power to the range at the circuit breaker or fuse box in case of an emergency. • User servicing—Do not repair or replace any part of the appliance unless specifically recommended in the manuals.
IMPORTANT INSTRUCTIONS FOR USING YOUR OVEN • Use Care When Opening Oven Door or Warmer Drawer— Stand to the side of the range when opening the door of a hot oven. Let hot air or steam escape before you remove or replace food in the oven.
See the INSTALLATION INSTRUCTIONS packaged with this range for complete installation and grounding instructions. Conversion to Liquefied Petroleum Gas (or L.P. Gas) The natural gas range is designed to allow for conversion to Liquefied Petroleum (L.P.) Gas. If L.P. conversion is needed, contact your local appliance dealer for assistance.
23. Burner Drip pans (some models). 24. Broil Pan (some models). 25. Broil Pan Insert (some models). 26. Leveling Legs and Anti-tip Bracket (included). NOTE: The features of your range may vary according to model type & color. Features At A Glance...
Shelf Fig. 2 Oven Racks Your range is equipped with one or more Flat Oven Rack(s). Place the rack(s) into the positions shown in Fig. 2. See the Recommended Rack Positions in the chart above. Baking Layer Cakes with 1 or 2 Oven Racks For best results when baking cakes using 2 oven racks, place cookware on rack positions 1 &...
Setting Surface Controls Setting Surface Controls Your range may be equipped with different sized surface burners. The ability to heat food quicker and in larger volumes increases as the burner size increases. The SIMMER burner (some models) is best used for simmering delicate sauces, etc.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various pad functions of the oven as described below. CLOCK BAKE TIME PAD— Used PAD— Used to to set the enter the length of time of day.
Note: The time of day must first be set in order to operate the oven. To Set the Clock When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash "12:00".
To Set or Change the Temperature for Baking The oven can be programmed to bake at any temperature from 170°F to 550°F (77°C to 287°C). To Set the Controls for Baking: 1. Press . "— — —" appears in the display. 2.
To Set the Timed Bake and Delay Start (Delayed Timed Bake) Features BAKE TIME and START TIME pads operate the features that will turn the oven ON and OFF at the times you select in advance. The oven can be programmed to start immediately and shut off automatically (Timed Bake) or to begin baking at a later time with a delayed start time (Delay Start).
Speed Bake™ Cooking System Benefits of Speed Bake™ Cooking System: —Foods cook up to 25 to 30% faster, saving time and energy. —Multiple rack baking. —No special pans or bakeware needed. Fig. 1 General Cooking Instructions: For Baking: 1. For optimum cooking results it is recommended to preheat the oven when baking foods such as cookies, biscuits and breads. 2.
To Set for Broiling: 1. Arrange the oven rack while oven is still cool. Position the rack as suggested in the Broil Rack Position Table below. 2. Press . " — — "will appear in display. 3. Press and hold the the display.
During the Self-Cleaning cycle, the outside of the range can become very hot to the touch. DO NOT leave small children unattended near the appliance. The health of some birds is extremely sensitive to the fumes given off during the Self-Cleaning cycle of any range.
Starting the Self-Clean Cycle or a Delayed Start Self-Clean Cycle For satisfactory results, use a 2 hour Self-Clean cycle for light soils and a 3 hour cycle for heavier soils. NOTE: The kitchen area should be well ventilated using an open window, ventitlation fan or exhaust hood during the 1st Self-Clean cycle.
Rinse & wipe dry with a clean cloth. Remove all cleaners or the porcelain may become damaged models), Door Liner & during future heating. DO NOT use spray oven cleaners on the range top. Oven Bottom Remove racks. See "Removing & Replacing Oven Racks" under Before Setting Oven Controls. Use Oven Racks a mild, abrasive cleaner, following the cleaner’s recommendations.
4. Replace glass shield over bulb and snap wire holder into place. 5. Turn power back on again at the main source (or plug the range back in). 6. The clock will then need to be reset. To reset, see Setting the Clock and oven light.
Cleaning the Contoured Well Areas, Burner Cap, Burner Head and Burner Drip Pans he contoured well areas, burner cap, burner head and burner drip pans (some models) should be routinely cleaned. Keeping the burner ports clean will prevent improper ignition and an uneven flame. Refer to the following instructions: Note: The burner grate style shown above may be a different depending on your model.
Poor installation. Place oven rack in center of oven. Place a level on the oven rack. Adjust leveling legs at base of range until the rack is level. When range is level, cooktop may appear out of alignment if countertop is not level.
OCCURRENCE Oven smokes excessively during broiling. Oven control beeps and displays any F code error (for example F11). Poor baking results. Self-Cleaning cycle does not work. Soil is not completely removed. Flames inside oven or smoking from vent. Before You Call Solutions to Common Problems POSSIBLE CAUSE/SOLUTION Meat is too close to the broil burner.
Major Appliance Warranty Information Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions.