Indicator - Canon PowerShot SX210 IS User Manual

Screen Display in Dark Shooting Conditions
The display automatically brightens when shooting in dark conditions, allowing
you to check the composition (Night Display function). However, the brightness of
the image on the screen, and the brightness of the actual image recorded may be
different. Screen noise may appear and the movement of the subject may appear
somewhat jagged on the screen. This has no effect on the recorded image.
Overexposure Warning during Playback
In "Detailed Information Display" (pp. 44
image flash on the screen.
Histogram during Playback
Dark Bright

Indicator

The indicator on the back of the camera (p. 43) will light or blink depending
on the camera's status.
Colors Status
Lights
Green
Blinks
Lights
Orange
Blinks
When the indicator blinks green, data is being recorded to/read from the memory
card or various information is being transmitted. Do not turn off the power, open the
memory card slot/battery cover, shake or jolt the camera. These actions may
corrupt the image data or cause the camera or memory card to malfunction.
∆
The graph that appears in "Detailed
High
Information Display" (pp. 44
the histogram. The histogram shows the
distribution of brightness in an image
Low
horizontally, and the amount of brightness
vertically. When the graph approaches the
right side, the image is bright, but when it
approaches the left side, the image is dark,
and in this way you can judge the exposure.
Shooting preparation complete/Display off
Recording/reading/transmitting image data
Shooting preparation complete (flash on)
Camera shake warning (pp. 26
165), overexposed areas of the
,
Operation Status
,
64)
Indicator
165) is called
,
(pp. , )
147 153
45