Film And Frame Dial; Film Type Indicator - Canon VT de luxe Instructions Manual

8
-
A
...
E
c
a.=
...
01
E
...
-
. ..
The Film Frame Counting Dial (20)
on the Canon VT de luxe shows you
the number of frames you have not
yet exposed. It should be set at the
number corresponding to the number
of exposures possible on the film
you have just loaded (normally 20
or 36). To do this rotate the Film
Frame Counting Dial Setting Wheel
(15) until the correct number appears
on the dial. Note that only even
numbers are engraved. Intermediate
dots represent the odd numbers.
Thereafter, the Dial will operate auto-
matically. When the last picture has
been exposed, the Dial will register "0".
F.lm Type Indicator
As a reminder, set the Film Type
Indicator (19) to the ASA speed of
the film you are using, and to show
whether you are using black-and-white
or color. (Blue dot indicates daylight,
red indicates tungsten.)
This indicator is adjusted by twisting
the top of the Film Winding Knob (1 )
wi th your finger.