Changing Shooting Function Settings - Canon PowerShot SX210 IS User Manual

Changing Distance Units
You can change the distance units that display in the zoom bar (p. 24) and
the MF indicator (p. 87) from m/cm to ft/in.

Changing Shooting Function Settings

If you set the mode dial to G, you can change the settings in the 4 tab
(p. 47).
Before attempting to shoot using a function explained in this chapter in
modes other than G mode, check if the function is available in those
modes (p. 168).
Switching the Focus Setting
The camera focuses on whatever it is aimed at even when the shutter button
is not pressed. However, you can set it so that the camera only focuses when
the shutter button is pressed halfway.
Changing Shooting Function Settings
∆
Choose [Distance Units], then press the
qr buttons to choose [ft/in].
∆
Choose [Continuous AF], then press the
qr buttons to choose [Off].
Since the camera focuses continuously until
you press the shutter button halfway, it
On
allows you to shoot without missing photo
opportunities.
The camera does not continuously focus,
Off
thereby conserving battery power.
149