Turning The Flash On; Changing The Focus Range (Macro) - Canon PowerShot SX210 IS User Manual

Turning the Flash On

You can make the flash fire every time you shoot. At maximum wide angle,
the flash range is approximately 75 cm – 3.5 m (2.5 – 11.5 ft.), and at
maximum telephoto, it is 1.0 – 2.0 m (3.3 – 6.6 ft.)
The setting screen does not appear even when you press r.
The flash is lowered. Raise the flash manually.

Changing the Focus Range (Macro)

When it is difficult to focus because your shot contains subjects that are both
near and far, you can change the focus range (the distance range from your
subject) to focus more reliably.
Shooting Range
e
5 – 50 cm (2.0 in. – 1.6 ft.)
* When the zoom lever is moved toward j and held until the lens stops moving, which
is the maximum wide angle setting of the lens.
The edges of the image may darken if the flash fires in macro shooting.
For macro shooting, e will turn gray in the area that displays in the yellow
bar underneath the zoom bar, and the camera will not focus.
Choose h.
∆ After pressing the r button, press the qr
buttons or turn the  dial to choose h,
then press the m button.
Once set, h will appear.
Choose e.
∆ After pressing the q button, press the qr
buttons or turn the  dial to choose e,
then press the m button.
Once set, e will appear.
*
Only focuses on close subjects.
Description
71