Table of Contents
Advertisement
Installation
Accessories
Depending on the model that you have purchased, you are supplied with several
accessories that can be used in a variety of ways.
CAUTION
DO NOT operate the microwave oven without the roller ring and turntable.
MC32J7055CT_EU_DE68-04319E-01_EN.indd 9
01 Roller ring, to be placed in the centre of
the oven.
Purpose: The roller ring supports the
turntable.
02 Turntable, to be placed on the roller
ring with the centre fitting on to the
coupler.
Purpose: The turntable serves as the
main cooking surface; it
can be easily removed for
cleaning.
03 High rack, Low rack, to be placed on the
turntable.
Purpose: The metal racks can be used
to cook two dishes at the
same time. A small dish may
be placed on the turntable
and a second dish on the
rack. The metal racks can be
used in grill, convection and
combination cooking.
04 Crusty plate, see page 24.
Purpose: The crusty plate is used
to brown food better in
the microwave or grill
combination cooking modes.
It helps keep pastry and
pizza dough crisp.
Installation site
•
20 cm
10 cm
above
behind
•
•
10 cm
85 cm
on the side
of the floor
•
•
Turntable
Remove all packing materials inside the
oven. Install the roller ring and turntable.
Check that the turntable rotates freely.
Select a flat, level surface approx.
85 cm above the floor. The surface
must support the weight of the oven.
Secure room for ventilation, at least
10 cm from the rear wall and both
sides, and 20 cm from above.
Do not install the oven in hot or damp
surroundings, such as next to other
microwave ovens or radiators.
Conform to the power supply
specifications of this oven. Use only
approved extension cables if you need
to use.
Wipe the interior and the door seal
with a damp cloth before using your
oven for the first time.
English 9
2016-04-11
5:07:50
Advertisement
Table of Contents
