Turning On/Off The Power - JVC JY-HM70 Detailed User Manual

Turning On/Off the Power

Turning On the Power
To use the battery, refer to "Charging the Battery Pack" (A p. 5) .
0
When the AC adapter is connected
o
1
Connect the AC adapter to the "DC" terminal
TT.1 BATT.2
REMOTE
AV
DC
.
2
Set the "STANDBY/ON OFF" switch to "ON".
.
The camera recorder starts up in Camera mode.
0
The camera recorder always start up in Camera mode when the
0
power is turned on.
o
Use the "CAM/MEDIA" operation mode selection switch to switch to a
different mode. The "CAM" lamp and "MEDIA" lamp change as below.
During Camera mode
During Media mode
AC Adapter To
AC Outlet
0
Turning Off the Power
1
o
If the unit is running on battery alone, and "AUTO POWER OFF" in the
common menu is set to "ON", the unit will turn off automatically if it is not
operated or does not operate for 5 minutes.
" AUTO POWER OFF " (A p. 115)
Memo :
0
"CAM/MEDIA" operation mode and lamp status
Mode
Lights up in red
Light goes out
.
To switch to the Media mode, turn the "CAM/MEDIA" selection switch, or
press the "CAM/MEDIA" button.
(You can also use the "<<CAM/<<MEDIA" button on the touch screen.)
Set the "STANDBY/ON OFF" switch to "OFF".
.
Auto power off feature
When both the battery and AC adapter are connected, power from the AC
adapter connection will be used. As such, the "AUTO POWER OFF"
function will not have any effect.
Getting Started
"CAM" lamp "MEDIA" lamp
Light goes out
Lights up in red
11