Table of Contents
Advertisement
Available languages
Available languages
table of contents
EN
1.0
2.0
2.1
access panel
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
4.0
4.1
4.2
note:
The information throughout this manual is believed to be correct at the time of printing. Wolf Steel Ltd. reserves
the right to change or modify any information within this manual at any time without notice. Changes, other than
editorial are denoted by a vertical line in the margin.
WARNING:
!
which are known to the State of California to cause cancer, and chemicals including carbon
monoxide, which are known to the State of California to cause birth defects or other reproduc-
tive harm. For more information, go to www.P65Warnings.ca.gov.
1.0 general information
This burner and log assembly are approved for use in the HDX52-1 gas appliance only. They are not approved for
use as a stand alone appliance or in conjunction with any other appliance.
2.0 installation
2.1
access panel
A.
Remove the door
(refer to installation
instructions). Remove
the 8 securing
screws and lift the
plate up and out of
the appliance. The
gasket will need to be
replaced if damaged.
2.2
burner assembly
A.
Attach the burner assembly to the fi rebox
base with the 4 screws supplied.
2
W415-2745 / A / 11.04.19
This product can expose you to chemicals including lead and lead compounds,
INSIDE APPLIANCE
2
2
2
2
3
4
5
7
7
7
7
8
8
8
9
10
11
OUTSIDE APPLIANCE
E
Advertisement
Chapters
Table of Contents
