Storing Dtmf Numbers; Confirming Stored Dtmf Numbers - Kenwood TK-278G Instruction Manual

Storing DTMF Numbers

Note: Auto Dialling must first be activated by your dealer.
You can store DTMF numbers (16 digits maximum)
in each of the 9 Auto Dial memory locations (1 ~ 9).
1 Press the # key.
• "D" appears on the display.
2 Enter the desired digits on the keypad.
• You can enter the digits 0 ~ 9, A ~ D,
(A ~ D may be disabled by your dealer, however
you can still enter them if desired.) When entering
"#", you must first press the PTT switch.
• To cancel, press o,
3 Press the # key, then enter a single digit number
(1 ~ 9) for the memory location.
• The original display is restored.

Confirming Stored DTMF Numbers

To confirm the numbers stored in memory locations:
1 Press the
• "A" appears on the display.
2 Enter the desired memory location number (1 ~ 9).
• The stored digits are displayed and their
corresponding DTMF tones sound.
• If programmed by your dealer, no DTMF tone will
sound when "D" is transmitted. "D" is used for a
pause time. The pause duration is programmed by
your dealer.
3 Press any key other than the PTT switch to exit.
•
, <, or >.
key.
, and #.
17