Dtmf Calls; Manual Dialling; Storing Dtmf Numbers - Kenwood TK-760G series Instruction Manual

Note: To make DTMF calls, you must have an optional microphone with a DTMF keypad. Ask your
dealer for more information.

MANUAL DIALLING

Method 1:
Press and hold the PTT switch, then enter the digits on the microphone keypad.
• You can enter the digits 0 ~ 9, A ~ D,
• If programmed by your dealer, you do not need to continuously hold the PTT switch. The
transceiver will remain in the transmit state for 2 seconds after releasing each key.
• While transmitting DTMF tones, the microphone is muted. You can monitor tones as they
are transmitted by listening to the speaker audio.
Method 2:
1 Enter the digits on the microphone keypad (16 digits maximum).
• TK-760G/ TK-860G only: Each digit appears on the display as it is entered and its
corresponding DTMF tone sounds.
• You can enter the digits 0 ~ 9, A ~ D,
dealer, however you can still enter them if desired.)
• If you enter a wrong digit or decide not to dial the number, press any key on the
transceiver front panel other than the IO switch, to exit.
2 Press the PTT switch to make the call.
• TK-760G/ TK-860G only: The digits scroll across the display and their corresponding
DTMF tone sounds.
• If programmed by your dealer, no DTMF tone will sound when "D" is transmitted. "D" is
used for a pause time. The pause duration is programmed by your dealer.

STORING DTMF NUMBERS

Note: Auto Dialling must first be activated by your dealer.
You can store DTMF numbers (16 digits maximum) in each of the 9 Auto Dial
memory locations (1 ~ 9).
1 Press the microphone # key.
• "D" appears on the display.
2 Enter the desired digits on the microphone keypad.
• You can enter the digits 0 ~ 9, A ~ D,
dealer, however you can still enter them if desired.) When entering "#", you must first
press the PTT switch.
• To cancel, press any key on the transceiver front panel, other than IO switch.
3 Press the microphone # key, then enter a single digit number (1 ~ 9) for the
memory location.
• The original display is restored.
12

DTMF CALLS

, and #. (A ~ D may be disabled by your dealer.)
, and #. (A ~ D may be disabled by your
, and #. (A ~ D may be disabled by your