Philips 32PFG5509/78 Service Manual page 19

ECN105
3
4.5.3 Small Signal Board (SSB)
Refer to Figure 4-16 for details.
Caution: it is mandatory to remount all different screws at their
original position during re-assembly. Failure to do so may result
in damaging the SSB.
1. Release the clips from the LVDS connector that connect
with the SSB [1].
Caution: be careful, as these are very fragile connectors!
2. Unplug all other connectors [2] and the FFC connector [3].
3. Remove all the fixation screws from the SSB [4].
4. The SSB can now be shifted from side connector cover,
then lifted and taken out of the I/O bracket. Refer to
Figure 4-16 for details.
Mechanical Instructions
EXA03
1
Figure 4-15 Rear cover removal [2]
back to
div. table
TPM14.2L LA
4
3
2
4
Figure 4-16 SSB removal
4. EN 19
2
19640_114.eps
2
4
1
4
19640_115.eps
2014-Feb-28