When The Self-Clean Cycle Is Completed; Stopping Or Interrupting A Self-Cleaning Cycle - Frigidaire GLCS389FSA Control Manual

Oven Cleaning
INSTRUCTIONS

When the Self-Clean Cycle is Completed

1. The time of day, "END", "DOOR LOCKED" and "CLEAN" will remain
in the display.
2. Once the oven has cooled down for approximately 1 HOUR, and
"DOOR LOCKED" is no longer displayed, the oven door can then be
opened.

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self-cleaning cycle due to
excessive smoke or fire in the oven:
Clear Clear
1. Press .
/Off /Off
2. The oven door can only be opened after the oven has cooled down for
approximately 1 HOUR and "DOOR LOCKED" is no longer displayed
(Figure 1).
IMPORTANT NOTES when using the Self-Clean feature:
1. On some models, the Self-Clean feature will not operate whenever a radiant surface
remains ON.
2. On some models, starting a self-clean cycle will turn ON the Cooktop Lockout feature. If
it is the case the symbol
the Cooktop Lockout feature is ON. The cooktop will remain locked until the Self-Clean
cycle has completed and the oven door has unlocked.
3. A Self-Clean cycle cannot be started if Oven Lockout feature is active.
4. If a Self-Cleaning Cycle has started but not finished and a power failure occurs, the
appliance may not have thoroughly cleaned. Once power is restored, the oven door and
the cooktop are unlocked. Then set for another Self-Clean cycle to finish.
5. If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can
never be set to start more than 12 hours in advance. To set for a delayed Self-Cleaning
cycle 12-24 hours in advance set the control for the 24 hour time of day display mode.
(continued)
will appear in the display (Figure 2) which will indicate that
PRESS
Clear Clear
/Off /Off
19
DISPLAY
Figure 1
Figure 2