Installing The Backup Battery - Canon OPTURA30 Instruction Manual

Installing the Backup Battery

The backup battery allows the camcorder to retain date, time (
camcorder settings while the power source is disconnected. Connect a power source to
the camcorder when replacing the backup battery to retain the settings.
1. Open the terminal cover.
2. Open the backup battery cover.
3. Insert the lithium battery with the
+ side facing outward.
4. Close the backup battery cover.
5. Close the terminal cover.
WARNING!
• The battery used in this device may present a fire or chemical burn hazard if
mistreated. Do not recharge, disassemble, heat above 212 °F (100 °C) or
incinerate the battery.
• Replace the battery with a CR2025 made by Panasonic, Hitachi Maxell, Sony,
Sanyo, or with Duracell2025. Use of other batteries may present a risk of fire or
explosion.
❍ Do not pick up the battery using tweezers or other metal tools as this will
cause a short circuit.
❍ Wipe the battery with a clean dry cloth to ensure proper contact.
❍ Keep the battery out of reach of children. If it is swallowed, seek medical
assistance immediately. The battery case may break and the battery fluids may
damage stomach and intestines.
❍ Do not disassemble, heat or immerse the battery in water to avoid the risk of
explosion.
The backup battery has a life span of about a year.
you that it needs to be replaced.
w e
"j" flashes in red to inform
21) and other
r
t
q
E
17