Using A Household Power Source - Canon OPTURA30 Instruction Manual

Using a Household Power Source

1. Turn the POWER switch to OFF.
2. Connect the power cord to the
power adapter.
3. Plug the power cord into a power
outlet.
4. Connect the power adapter to the
camcorder's DC IN terminal.
❍ Turn off the camcorder before connecting or disconnecting the power adapter.
❍ If the adapter is used close to a TV, it may cause picture interference. Move the
adapter away from the TV or the antenna cable.
❍ Do not connect any products that are not expressly recommended to the
camcorder's DC IN terminal or to the power adapter.
❍ You may hear some noise from the power adapter during use. This is not a
malfunction.
❍ Do not disconnect and reconnect the power cord while charging a battery
pack. Charging may stop. The battery pack may not be charged correctly even
if the CHARGE indicator glows steady. The battery pack may also not be
charged correctly when a power outage occurs during charging. Remove the
battery pack and attach it back to the camcorder.
❍ When the power adapter or battery pack is defective, the CHARGE indicator
flashes rapidly (at about 2 flashes/second) and charging stops.
❍ The CHARGE indicator informs you about the charge status.
0-50%:
More than 50%: Flashes twice every second
100%:
❍ Charging, Recording and Playback Times
Below times are approximate and vary according to the charging, recording or
playback conditions.
Charging Time
Max. Recording Viewfinder
Time
Typical Recording Viewfinder
Time*
Playback Time
* Approximate times for recording with repeated operations such as start/stop, zooming,
power on/off. Actual time may be shorter.
14
Flashes once every second
Glows steadily
NB-2LH
115 min.
90 min.
LCD 75 min.
50 min.
LCD 40 min.
105 min.
q
e
w
NB-2L BP-2L12
110 min. 180 min.
70 min. 145 min.
55 min. 120 min.
40 min. 80 min.
30 min. 70 min.
85 min. 175 min.
r
BP-2L14
210 min.
185 min.
155 min.
100 min.
85 min.
220 min.