Programmes; Settings - Progress PI1545X User Manual

PROGRAMMES

Programme
2)
3)
4)
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of
dishes can change the values.
2) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery
with normal soil. (This is the standard programme for test institutes).
3) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
4) Use this programme to quickly rinse the dishes. this prevents the remaining food to bond on the dishes and bad
odours to come out from the appliance. Do not use detergent with this programme.
Information for test institutes
For all the necessary information for test
performance, send an email to:
info.test@dishwasher-production.com

SETTINGS

Programme selection mode and
user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
Degree of Programme
soil phases
Type of load
Normal soil • Prewash
Crockery and • Wash 50 °C
cutlery • Rinses
• Dry
Heavy soil • Prewash
Crockery, cut- • Wash 70 °C
lery, pots and • Rinses
pans • Dry
Normal soil • Prewash
Crockery and • Wash 65 °C
cutlery • Rinses
• Dry
Fresh soil • Wash 60 °C
Crockery and
cutlery • Rinses
All • Prewash
Consumption values
1)
Dura-
tion
(min)
195
140 -
160
120 -
130
30
or 65 °C
14
Write down the product number (PNC) that
is on the rating plate.
In user mode, the following settings
can be changed:
• The level of the water softener according
to the water hardness.
These settings will be saved until you
change them again.
Progress 7
Energy Water
(kWh) (l)
1.039 11
1.5 - 1.6 13 - 15
1.3 - 1.6 15 - 17
0.8 9
0.1 4