13. Ensure that the flexible contacts for the IHF SPEAKER are
also positioned correctly.
15. Fit the LCD to the LCD SUPPORT.
17. Place the AUSTRALIA CONN BRACKET over the LCD connector
as shown. Always use new screws when assembling the
unit. Tighten the screws to the torque of 14Ncm in the order
shown.
Page
8
(24)
CONFIDENTIAL
Copyright © 2007 NOKIA. All rights reserved.
14. The side contacts must not be squeezed between the PWB
UPPER and the B-COVER.
16. Fit the shown side of the LCD into the B-COVER ASSY and close
the LCD connector.
18. Pay attention to the correct position of the spring contacts
when inserting the IHF SPEAKER into the B-COVER.
6555 RM-27/RM-276/ RM-289
Service Manual Level &2
ISSUE