Samsung DMS500TR Series Service Manual page 22

3. Disassembly and Reassembly
P a t r
AIR BREAK ASS'Y
DRAIN HOSE
&
ELECTRICAL
SAFETY HOSE
(STANDARD HOSE)
3-12
All manuals and user guides at all-guides.com
P h o o t
1) Remove DRAIN HOSE HOLDER using a screw
2) Remove DRAIN HOSE for back of product.
3) Remove the two (2) DRAIN HOSE connectors using
4) Remove the two (2) screws holding the INLET VALVE
5) You can remove the ELECTRICAL
1) Remove DRAIN HOSE by rotating it counterclock wise.
2) Remove two(2) screws holding the INLET VALVE
3) Remove the clamp holding the INLET HOSE.
4) Remove the clamp holding the INLET HOSE.
D e s c i r t p
17. Air Break ass'y
Separate top table ass'y
Separate housing L
Separate air break cap turn to anti
clock wise
1) Separate the AIR BREAK ASS'Y connector.
2) Remove the four (4) clamps and hose.
Caution
Take care when holding and removing the clamp
with a tool, as it may bounce and harm you.
18.Drain hose
Separate top table ass'y
Separate housing
Separate air break ass'y
driver.
Be careful to avoid breaking them, because they
are connected with a hook.
a screw driver.
COVER.
for back of product.
* STANDARD HOSE
and connector..
o i n