Startup/Prime - Graco 17C301 Operation, Parts

Startup/Prime

Startup/Prime
1. Perform Pressure Relief Procedure,
page 9.
2. Turn pressure control to lowest
pressure.
ti25287a
3. Turn the ON/OFF switch to ON position.
4. Place fluid intake in paint pail. Place
drain tube in a waste pail.
14
5. Increase pressure 1/2 turn to start motor.
Allow paint to circulate through sprayer
until paint flows out the drain tube.
6. Turn prime valve horizontal. Disengage
the trigger lock.
ti25129a
ti25291a
15 s
ti25292a
334649H