Special System Settings - Kenwood DDX719WBTL Instruction Manual

Settings Settings
Touch one of the marks (1), then adjust the
position of the selected mark (2).
Initialize
Make sure that A and B are horizontally parallel, and
that C and D are the same length.
• Touch [Initialize] to set all the marks to the initial
default position. A confirmation message appears.
Touch [Yes].
* Selectable only when <Parking Guidelines> is set to [ON].
(Page 41)
<Front Camera>
(Only for DDX719WBTL/DMX719WBTL)
• ON: Activates the front view camera. Select this to
use the front view camera.
• OFF (Initial): Select this when no camera is
connected.
42 ENGLISH
<Front Camera Interruption >*
(Only for DDX719WBTL/DMX719WBTL)
Set the duraton (in seconds) to display the picture
from the front view camera when you shift the gear
from reverse (R) position to any other positions.
• OFF/5 sec/10 sec/15 sec (Initial)/20 sec
After the selected time, the screen return to the
previous screen.
* Selectable only when <Front Camera> and <R-CAM
Interruption> are set to [ON].
<Front Camera Mirror Image>*
(Only for DDX719WBTL/DMX719WBTL)
• ON: Displays the picture from the front view camera
horizontally reversed.
• OFF (Initial): Displays the picture from the front view
camera as it is.
* Selectable only when <Front Camera> is set to [ON].

Special system settings

Display the <Special> screen.
On the Home screen, touch as follows:
Then, on the <SETUP> screen, touch [Special].
<DEMO>*
• ON (Initial): Activates the display demonstration.
• OFF: Deactivates the display demonstration.
* Some features are not selectable when [ON] is selected.
<Manual Power OFF>
B
Assign the function of the button or HOME button
on the monitor panel when pressed and held.
• AV OFF: Turns off the screen and audio.
The screen and audio restores when receiving call,
inputs video signal from the rear view camera, etc.
• Complete OFF (Initial): Turns off the power.
<SETUP Memory>
• Lock: Locks the <Audio SETUP Memory>/<Audio
SETUP Recall>/<Audio SETUP Clear> settings.
– The items in the <Speaker/X'over> settings
cannot be adjusted when [Lock] is selected.
• Unlock (Initial): Unlocks the settings.
<Audio SETUP Memory>*
Memorizes the following audio settings:
• Fader/Balance
• Speaker/X'over
• Equalizer (Adjustment on user preset ([User1] –
[User4])/Subwoofer level adjustment)
• Position/DTA
• Sound Effect
A confirmation message appears. Touch [Yes].
* Selectable only when <SETUP Memory> is set to [Unlock].