Table of Contents
Advertisement
I N T E R N A L C H A N N E L S S E T T I N G S
Depending on the selected gas p.5.2.3 measurement units list can change. When setting a
new gas type and selecting a measurement unit «ppm» or «mg/m
ment accuracy by pushing the button
one.
5.2.5 «MIN. VALUE» / «MAX. VALUE» / «BLANKING ZONE»
Edited category is chosen by using the buttons
The category is changed by using the buttons
5.2.6 «THRESHOLD 1 VALUE»/ «THRESHOLD 2 VALUE»
Thresholds values are set in the range from «MIN. VALUE» to «MAX. VALUE». Threshold 2
value must be greater than threshold 1 value.
Edited category is chosen by using the buttons
The category is changed by using the buttons
23
. Then in the «ACCURACY» menu select the appropriate
ACCURACY
1
0,1
0,01
0,001
and
.
and
.
and
.
and
.
3
», it is possible to set measure-
MRBP.424321.001G2 Version 1.0 15/06/2020
Advertisement
Table of Contents
