Canon MV830 Instruction Manual page 84

5. Press the AUDIO DUB. button on the wireless
controller.
"AUDIO DUB." and "
6. Press the PAUSE
to begin dubbing.
• Audio device: Begin playback.
• Microphone: Speak into the microphone.
7. Press the STOP
to stop dubbing.
Audio device: Stop playback.
Use only tapes recorded in SP mode 12-bit audio sound with this camcorder.
Audio dubbing will stop if the tape has a blank section or a section recorded in
LP mode or 16-bit mode.
You cannot use the DV terminal for audio dubbing.
If you add sound to a tape not recorded with this camcorder, sound quality may
decrease.
Sound quality may decrease when you add sound to the same scene for more
than 3 times.
When you connect an audio device, check the picture on the LCD screen and
the sound via built-in speaker or audio device.
When you use the microphone, you can check the picture on a TV connected
via the AV terminal and the sound via headphones connected to the TV.
Set the zero set memory at the end of the scene you wish to dub audio. The
camcorder will automatically stop audio dubbing at that point.
84
" appear.
button on the wireless controller
button on the wireless controller
PAUSE
SLOW
ZERO SET
AUDIO DUB. TV SCREEN
MEMORY
PLAY
STOP
PAUSE SLOW
ZERO SET
AUDIO DUB. MEMORY TV SCREEN
PLAY
STOP
PAUSE SLOW
ZERO SET
AUDIO DUB. TV SCREEN
MEMORY