Returning To A Pre-Marked Position - Canon MV830 Instruction Manual

Returning to a Pre-marked Position

If you wish to return to a particular scene
later, mark the point with the zero set memory
and the tape will stop at that point when you
rewind/fast forward the tape.
This function is operated with the wireless
controller.
CAMERA
1. Press the ZERO SET MEMORY button at the point
you wish to return to later.
• "0:00:00
• To cancel, press the ZERO SET MEMORY button again.
2. When you have finished playback, rewind the tape.
• " RTN" appears.
• The tape stops automatically at "0:00:00".
• The tape counter changes to time code.
The zero set memory may not function correctly when the time code has not been
recorded consecutively.
70
PLAY (VCR)
" appears.
REW
button
ZERO SET
MEMORY
button
CARD CAMERA
PLAY
button
STOP
button
CARD PLAY
STOP
PAUSE
SLOW
ZERO SET
AUDIO DUB. TV SCREEN
MEMORY