Activating/Deactivating Advisory Tones; Setting Long-Distance And Area Codes; Advisory Tones - Siemens Gigaset SL78 Manual

Activating/deactivating

advisory tones

Your handset uses advisory tones to tell you
about different activities and statuses. The
following advisory tones can be activated/
deactivated independently of each other:
u
Key click: Every key press is confirmed.
u
Acknowledgment tones:
– Confirmation tone (ascending tone
sequence): At the end of an entry/set-
ting and when a new entry arrives in
the Call list.
– Error tone (descending tone
sequence): When you make an incor-
rect entry.
– Menu end tone: When scrolling to the
end of a menu
u
Battery low beep: The battery requires
charging.
In idle status:
¢
t
Advisory Tones
¤
You can enter data in the following fields:
Key Tones:
Select On or Off.
Confirmation:
Select On or Off.
Battery:
Select On, Off or In Call. The battery
warning tone is only activated/deacti-
vated and only sounds during a call.
§Save§
Press the Display key.
Please note
You can also set the call volume, ringers,
and advisory tones using the menu
¢
( page 24).
Setting long-distance and
area codes
To transfer phone numbers (e.g., in vCards),
it is essential that your area code (interna-
tional and local area code) is saved on the
phone.
Some of these numbers are already preset.
Ï
¢ ¢
v
Telephony
Check that the (pre)set area code is correct.
¤
You can enter data in the following fields:
q
Select/change input field.
r
Navigate in the input field.
Ñ
If necessary, delete number:
press the Display key.
~
Enter number.
§Save§
Press the Display key.
Example:
Area Codes
International code:
011- 1
Local area code:
1-972
Û
Save
Please note
If a long distance number is recorded on
your mobile phone without the national
access code "1" ( i. e., 312 -555-1212
instead of 1-312-555-1212), please add
the "1" in front of the telephone number
before transferring the number to the
phonebook SL78H handset via Blue-
tooth.
Handset settings
¢
Area Codes
45