Table of Contents
Advertisement
Quick Links
IMPORTANT SAFETY INFORMATION: PLEASE READ
WARNING: Important! Read and understand these instructions before assembling or
using the Bath Seat. If you do not understand any part of these warnings, cautions or
instructions, contact a healthcare professional for direction in the use of this product. If the
Bath Seat is not properly assembled and adjusted, personal injury and damage to the Bath
Seat could result.
WARNING: If components are damaged or missing, contact your distributor immediately.
DO NOT use substitute parts. Use only Lumex replacement parts. Non-Lumex replacement
parts could cause personal injury and damage to the Bath Seat.
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov.
WARNING: GF Health Products, Inc. assumes no responsibility for any damage or injury
caused by improper assembly or use of this product.
INTENDED USE
The 7921RA / 7931RA Bath Seat is intended for use by individuals who require seating support
while bathing or showering. It is designed to be placed fully inside the bathtub or shower.
Contraindications
WARNING: This product has a weight limit of 350 lb, EVENLY DISTRIBUTED.
WARNING: DO NOT use this product as a transfer bench or climbing device.
WARNING: Use this product only with tub floors wider than 18
ASSEMBLY
arm lock button
1. Remove all components (shown above) from the box.
7921RA: BATH SEAT WITH ARMS AND BACKREST /
7931RA: BATH SEAT WITH ARMS
ASSEMBLY AND OPERATION INSTRUCTIONS
SAVE THESE INSTRUCTIONS FOR FUTURE USE
PARA INSTRUCCIONES EN ESPAÑOL, VÉASE LA PÁGINA 5
arms
backrest
(7921RA only)
backrest
lock button
7921RA / 7931RA Bath Seat with Arms
(7921RA with Backrest Shown Above)
backrest
channel guides
leg receptacles
arm sockets
backrest tubes
(7921RA only)
3
/
".
4
leg height
adjustment
lock button
leg extensions
suction feet
seat
legs
1
Advertisement
Table of Contents
Related Manuals for Graham Field Lumex 7921RA
Summary of Contents for Graham Field Lumex 7921RA
- Page 1 7921RA: BATH SEAT WITH ARMS AND BACKREST / 7931RA: BATH SEAT WITH ARMS ASSEMBLY AND OPERATION INSTRUCTIONS SAVE THESE INSTRUCTIONS FOR FUTURE USE PARA INSTRUCCIONES EN ESPAÑOL, VÉASE LA PÁGINA 5 IMPORTANT SAFETY INFORMATION: PLEASE READ WARNING: Important! Read and understand these instructions before assembling or using the Bath Seat.
- Page 2 2. Place the seat facedown on a flat surface. step 7 3. Locate the four legs. step 8 4. Install legs on frame: press lock button on each plastic leg sleeve end and slide the leg onto the frame until the button clicks into place. 5.
- Page 3 OPERATION Adjusting Leg Height Push in the leg height adjustment lock button and move leg extension to the desired height position — you will hear it click into place. Ensure that all four legs are locked into place at the same height and all leg height adjustment lock buttons protrude fully through adjustment holes.
- Page 4 LIMITED WARRANTY SCOPE OF WARRANTY GF Health Products, Inc. (“GF”) warrants to the original purchaser only that it will replace or repair components, at GF’s sole discretion, that are defective in material or workmanship under normal use and service. All warranties are conditioned upon the proper use of the products strictly in accordance with good commercial practice and applicable GF instructions and manuals, including proper use and maintenance.
Need help?
Do you have a question about the Lumex 7921RA and is the answer not in the manual?
Questions and answers