Table of Contents
Advertisement
Installing Camera without angled bracket
CAUTION:
Before handling wiring of your house make
sure to turn off breaker in fuse box to existing doorbell
to avoid injury or death.
1. After turning power off,
remove old doorbell.
2. Place bracket on wall
and mark where screws
will go.
3. If you are installing on
brick or concrete, use
(B)wall anchors. If
installing on wood or
metal just use (A)screws.
4. Attach bracket to wall using
(A)screws. Make sure bracket is
level. Run the wires coming
from the house through the
opening in the bracket. Make
sure the bracket is installed
with the (UP) arrow pointing up.
Advertisement
Table of Contents
