Table of Contents
Advertisement
3. To connect the prongs, slightly unscrew both
screw terminals and place prongs from the Chime
Kit under each screw and tighten(It does not
matter which color wire from the Chime Kit
connects to which screw).
4. Using the included 3M adhesive, stick the Chime
Kit to your chime wherever there is space and
replace the cover. Be careful not to interfere with
any of the chime's moving parts.
Mount on the outside of the chime if there is not
enough room to mount inside. And replace
your chime's cover.
Advertisement
Table of Contents
