Table of Contents
Advertisement
ADD DEVICE
1. Plug in Video Doorbell with USB cable into USB block
in outlet or connect to electrical of house. If the light
is not already blinking, insert the provided reset pin
gently into the reset hole for 3-6 seconds until you
hear a chime, then release. Then wait a few
seconds. The light should then start blinking rapidly.
Camera is now ready to be set up.
2. Make sure phone is connected to your Wi-Fi
network and that it is a 2.4GHz network.
3. Press the (+) symbol in the top right corner of
the app and select the Smart Camera from
the list of devices to add.
Advertisement
Table of Contents
