Philips 43BDL3010Q/75 User Manual page 27

Network control port.
Select from: {RS232} / {LAN}.
Boot on source
Select the input source when booting.
Input: select the input source when booting.
No failover function, the system will keep the source even the source
has no signal input.
Monitor information
Show information about your display, including Input source, Resolution,
Model name, SW version, Serial number and MAC address.
Power Save
Mode 1 [TCP off, auto off]
Mode 2 [TCP on, auto on/off]
Power save modes
Mode 1: DC off -> Power off. LED: Red.
Power Save -> Power off, LED: Red
Mode 2: DC off -> Power off, LED: Red.
Power Save -> Power Saving. LED: Orange. Can be wake up.
Mode 1 [TCP off, auto off]
Mode 2 [TCP on, auto on/off]
Firmware update
Update scalar firmware by USB.
Factory Reset
Reset all your customized settings to the factory default values.
Option Reset
Reset all settings in the option menu to the factory preset values.
RCU Power
No Signal
Button Off
DC OFF DC OFF
When signal is back,
DC OFF
system wakes up
18