Philips 43BDL3010Q/75 User Manual page 25

Example: 5 x 5 screen matrix (25 displays)
H monitors = 5 displays
V monitors = 5 displays
H monitors
1 2
6 7
11 12
16 17
21 22
Frame comp.
Turn the frame compensation function On or Off. If you select {On}, the
display will adjust the image to compensate for the width of the display
bezels in order to accurately display the image.
{On}
{Off}
Frame comp. Top
Adjust the top frame compensation.
Frame comp. Bottom
Adjust the bottom frame compensation.
Frame comp. Left
Adjust the left frame compensation.
Frame comp. Right
Adjust the right frame compensation.
3 4 5
8 9 10
13 14 15
18 19 20
23 24 25
5.2.4. Network
PICTURE
AUDIO
TILING
NETWORK
Position
OPTION
DHCP
Select how this display should assign address to the network resource.
(On: DHCP & Auto IP, Off: Static IP). If DHCP is set to On, the device
will request and be assigned an address every time it is booted up.
Otherwise, you need to ask your network administrator for the
appropriate IP settings.
IP address/Netmask/Gateway/Set
Enter the IP address/Netmask/Gateway/Set.
5.2.5. Option
PICTURE
AUDIO
TILING
NETWORK
OPTION
Language
Set OSD menu language.
Auto signal detection
This function allows the system to detect and display the available signal
sources automatically.
• {Off} - Once an input is connected, it can only be selected manually.
If the selected input has signal, set the system to display the image
automatically according to the search order of each option.
The options are: {Auto} / {Failover}
• {Auto}: VGA-> DVI-I-> HDMI1-> HDMI2->USB.
• {Failover}
-
Failover 1: User-defined setting. Default:HDMI 1.
-
Failover 2: User-defined setting. Default:HDMI 1.
- Failover 3: User-defined setting. Default:HDMI 1.
- Failover 4: User-defined setting. Default:HDMI 1.
- Failover 5: User-defined setting. Default:HDMI 1.
-
Failover 6: User-defined setting. Default:HDMI 1.
16
DHCP Off
IP address
. .
Netmask . .
Gateway . .
Set
Language English
Auto signal detection
Date and Time
Schedule
HDMI with One Wire
Power LED light
On
Logo On
Monitor ID On
Network control port
Boot on source
Monitor info
.
.
.